Perodua car repair in Tebrau
Pungbrother services Perodua cars from Tebrau at the Masai workshop in Cahaya Kota Puteri. Most routine repairs start with a diagnostic inspection at RM 80 for small cars or RM 120 for large models, taking about an hour. The repair cost and time depend on what the inspection finds.
What is included in a Perodua diagnostic inspection?
You describe the symptom — noise, warning light, poor cooling, or a handling change. The workshop checks the engine, electrics, brakes and suspension visually, runs an OBD scan where applicable, and gives you a repair quote with the next steps clear.
What repairs does Pungbrother handle most often on Perodua models?
Myvi, Axia and Bezza owners commonly bring in brake pad wear, suspension clunking over bumps, battery or alternator faults, and air-conditioning loss of cooling. Fluid leaks under the car and battery warning lights are routine. Most complete same-day once parts are confirmed in stock.
Should I mention a specific symptom when I book?
Yes. A grinding noise when braking means different work than a squealing sound. Coolant in the radiator is different from no cooling output. Send the model, year if you know it, and the exact symptom on WhatsApp before you travel. The workshop can then tell you whether to book now or later.
How do I travel from Tebrau to the Pungbrother workshop?
The workshop is in Cahaya Kota Puteri, Masai — address 1, Jalan Kota 1/1, 81750 Masai. Confirm the route and exact travel time from your starting point in Tebrau before you set off. Call +60 11-3591 1335 or WhatsApp https://wa.me/601135911335 to book a slot.
Perodua diagnostic and common repair pricing at Pungbrother
| Service | Small car (Myvi, Axia, Bezza) | Large car (Ativa, Alza) | Time |
|---|---|---|---|
| Diagnostic inspection | RM 80 | RM 120 | ~1 hour |
| Brake pads | RM 200 | RM 250 | ~1 hour |
| Battery replacement | RM 250 | RM 350 | ~30 mins |
| Oil and filter change | RM 100 | RM 150 | ~30 mins |
Perodua specifics
Myvi, Axia, Bezza, Ativa and Alza models commonly bring in brake pad wear and suspension component wear. Battery and charging-system faults are frequent, especially in older models. Air-conditioning coolant loss and fluid leaks appear regularly. Pungbrother inspects these systems as part of general diagnostic work.
Coming from Tebrau
Tebrau drivers arrange service at the Pungbrother workshop located in Cahaya Kota Puteri, Masai, at 1 Jalan Kota 1/1, 81750. Confirm the route and travel time from your exact starting point in Tebrau before departure.
Frequently asked questions
Can I drive a Myvi from Tebrau to Masai if the engine warning light is on?
Depends on the symptom. A steady light with no noise or loss of power is often safe to drive to the workshop. A flashing light means the engine is misfiring — stop and call for help. Send a photo of the dashboard on WhatsApp first and ask whether to drive or not.
How long does a brake pad replacement usually take?
About one hour for most Perodua models. The workshop inspects the pads, discs and callipers first, quotes the work, replaces the pads, and runs a road-safety check. If the discs are worn or scored, that work is quoted separately and may add 30 minutes.
What should I do if my Myvi battery dies between now and my appointment?
The battery is testable — low voltage or a swollen case means replacement. Bring the car in earlier or have it jumped started to reach the workshop. Once replaced, the workshop checks charging voltage to confirm the alternator is working. If not, that gets diagnosed separately.
My Ativa air-conditioning is not cold but does not smell bad. What might that be?
Could be low refrigerant from a slow leak, a faulty compressor clutch, or weak airflow from a clogged filter. The diagnostic inspection includes a refrigerant pressure check and a visual look for leaks. Most are fixable same-day if detected early, so book soon to avoid a full-price compressor replacement.
Does your car need an inspection?
1, Jalan Kota 1/1, Cahaya Kota Puteri, 81750 Masai, Johor